After-sales Service 
Desiccant Dehumidifier / Dry Room / Heatless Desiccant Outdoor Air Handling Unit

Maintenance Details

Inspection points Inspection details Inspection methods Maintenance details Inspection cycle Replacement cycle
1 year Others 24/7 Operation
Rotor Clog, dirt, and damage check, and performance verification*1 Visual inspection Cleaning or repairing 5 years
Rotor drive unit ボンズカジノ リアルマネーr motor noise, belt/chain condition, oiling status, current values, and insulation resistance values Visual inspection Cleaning, oiling, and belt adjustment or replacement Belt : 3 years
Chain : 5 years
Motor : 3 years
Electrical measurements
Air seal Wear, scratches, cuts, and contact condition Visual inspection Adjustment or replacement 2 years
Fan • ボンズカジノ リアルマネーr abnormal noise, belt condition, oiling status, current values, and insulation resistance values Auditory inspection Cleaning, oiling, and belt adjustment or replacement Belt: 1 year
Visual inspection
Electrical measurements
Heater ボンズカジノ リアルマネーr fin dirt, tube/piping leakage, current values, and insulation resistance values Visual inspection Cleaning or replacement 3 years
Electrical measurements
Cooler ボンズカジノ リアルマネーr dirt and tube/piping leakage Visual inspection Cleaning or replacement
Chiller ボンズカジノ リアルマネーr gas and oil levels, dirt, and tube/piping leakage Visual inspection Cleaning or replacement
Regular inspection based on the applicable regulations on the rational use and appropriate management of fluorocarbons
Filter ボンズカジノ リアルマネーr tears, dirt, and frame deterioration Visual inspection Washing or replacement Monthly Depending on the level of dirt and static pressure increase
Control panel Operational check, and ボンズカジノ リアルマネーr broken or disconnected wiring Visual inspection Tighten any loose terminals and re-insert
Cleaning
Drain pan ボンズカジノ リアルマネーr dirt, foreign objects, and corrosion Visual inspection Washing
Appearance ボンズカジノ リアルマネーr dirt, foreign objects, and corrosion Visual inspection Repairing
Inside the Unit ボンズカジノ リアルマネーr dirt, foreign objects, and corrosion, and insulation material check Visual inspection Cleaning and repairing
Dehumidification performance Measurement at each point *1 Dew point measurement, etc. Dew point sensor to be calibrated by the manufacturer every year

*1 : If the dehumidification performance is declining, we will ボンズカジノ リアルマネーr any issues with the rotor performance and the system.
If the cause is rotor deterioration, an analysis of the root cause is also possible.

Rotor Deterioration Inspection and Analysis

ボンズカジノ リアルマネー

We recommend regular diagnostic checks of the honeycomb rotor.

We will propose analysis items tailored to your operating environment.

Benefits of Regular Diagnosis

1. Prevention of sudden performance drop and potential issues

2. Optimize for changes in operating conditions and predict the timing of replacement

3.Budgeting and cost reduction through planned replacements

Disadvantages of Rotor Deterioration

  • Trouble due to performance degradation (production stoppage, yield deterioration, etc.)
  • Load on fan and other ancillary equipment due to clogging
  • Accumulation of high boiling point substances leading to fire and burning

We recommend rotor deterioration inspections not only for maintaining performance but also for ensuring safe use.

Factors Contributing to Rotor Deterioration

  • Aging
  • Condition of processed air
  • Inclusion of degrading substances
  • Effects of installation environment, etc.

Flow of Periodic Diagnosis

  • Contact us

  • Schedule adjustment

  • Rotor element sampling

  • Basic investigation/Detailed analysis
    (3-4 weeks)

  • Results reporting

  • Recommendations for rotor replacement(If performance falls below a certain level:)

  • Rotor replacement

If rotor replacement is needed:
Rotor replacement

Analysis details

Basic investigation

Analyzing the state of the rotor to understand it accurately

  • Static adsorption test (Adsorbent performance test)
  • Thermogravimetry differential thermal analysis (TG/DTA)
  • Specific surface area and pore distribution measurement

Detailed analysis

Conducting a thorough inspection and analyzing the cause of deterioration

  • Digital microscope observation
  • pH measurement (Acid and chlorine measurement)
  • Energy dispersive X-ray analysis (EDX)
  • X-ray fluorescence (XRF) surface inspection
  • Fourier-transform infrared spectroscopy (FTIR)
  • Gas chromatography–mass spectrometry (GC–MS)
  • Ion concentration analysis
  • Compressive strength test
  • XRD
Contact ボンズカジノ リアルマネー